$Vn ---- Erweiterte ISDN-Meldungen
Das $V beeinflusst grundsätzlich das Format aller Modemmeldungen. Im Gegensatz zu \V, das nur die CONNECT-Meldungen erweitert, werden hier auch Meldungen, wie RING, erweitert. Der Wertebereich für $V liegt zwischen "0"-"15", wobei die gewünschten Parameter bitweise abgearbeitet werden. Die Summe der zu setzenden Elemente ergibt die Eingabe für das Kommando. Die Standardvorgabe ist "0".
1 | ----- | Anrufernummer nach dem 1. RING ausgeben
Format:
RING<CR><LF>
FM: 123456789 TO: 987654321<CR><LF>
("FM": FROM = Anrufnummer)
("TO:" TO = Zielnummer) | 2 | ----- | Bei NO CARRIER + Grund (Cause) ausgeben
(Liste siehe unten) | 4 | ----- |
ALERTING bei der Wahl verwenden
Die ALERTING Meldung informiert bei ISDN Gegenstellen darüber, dass der Ruf die Gegenstelle erreicht hat.
| 8 | ----- |
SIGNALING LINK NOT ESTABLISHED ausgeben.
Wird gemeldet, falls der D-Kanal nicht verfügbar ist.
|
Fehlermeldungen:
1 | Unallocated number | 2 | No route to specified transit network | 3 | No route to destination | 6 | Channel unacceptable | 7 | Call awarded and being delivered in an established channel | 16 | Normal call clearing | 17 | User busy | 18 | No user responding | 19 | No answer from user (user alerted) | 21 | Call rejected | 22 | Number changed | 26 | Non-selected user clearing | 27 | Destination out of order | 28 | Invalid number format | 29 | Facility rejected | 30 | Response to STATUS REQUIRY | 31 | Normal, unspecified | 34 | No circuit/channel available | 38 | Network out of order | 41 | Temporary failure | 42 | Switching equipment congestion | 43 | Access information discarded | 44 | Requested circuit/channel not available | 47 | Resources unavailable, unspecified | 49 | Quality of service unavailable | 50 | Requested facility not subscribed | 57 | Bearer capability not authorized | 58 | Bearer capability not presently available | 63 | Service or option not available, unspecified | 65 | Bearer capability not implemented | 66 | Channel type not implemented | 69 | Requested facility not implemented |
70 | Only restricted digital information bearer capability is available | 79 | Service or option not implemented, unspecified | 81 | Invalid call reference value | 82 | Identified channel does not exist | 83 | A suspended call exists, but this call identity does not | 84 | Call identity in use 85: No call suspended | 86 | Call having the requested call identity has been cleared | 88 | Incompatible destination | 91 | Invalid transit network selection | 95 | Invalid message, unspecified | 96 | Mandatory information element is missing | 97 | Message type non-existent or not implemented | 98 | Message not compatible with call state | 99 | Information element non-existent or not implemented |
100 | Invalid information element contents | 101 | Message not compatible with call state | 102 | Recovery on timer expiry | 111 | Protocol error, unspecified | 127 | Interworking, unspecified |
Gültig für jede Firmware
|